Has anyone run into the problem with. Z30 on a m600 pro using a iPad Pro with the USB-C I have all setting showing up including the SD card storage around but no video. Thing it is the iPad with USB-C. Thanks you any info on the problem.
No video on m600 pro with Z30
- Thread starter Stevenfair
- Start date
- Status
- Joined
- Aug 7, 2013
- Messages
- 1,288
- Reaction score
- 599
LB/Ext switch possibly.....
Lightbridge & EXT Video Signals
Similar post in M600, but this is more generalized for larger audience of discussion. Forum Admin, if this is considered "double post" delete the M600 post please. Recently added DJI Gimbal mount(s) to M600 for Z3, X5R, XT R, Z30 cameras. This resulted in No Video display until discovering &...
inspirepilots.com
- Joined
- Jul 1, 2018
- Messages
- 25
- Reaction score
- 6
- Location
- Virginia Beach, Virginia USA
- Website
- www.chriscrumley.com
Steven, will be worth a try to check your “Bandwidth Allocation”. That’s the usual culprit when my HDMI signal isn’t getting through.....although I’m getting the HDMI signal from a Sony a7R IV through a SRW 60G and not Z30. In GO App, three line menu at top right corner > HD > Bandwidth Allocation slider.
Last edited:
that was it had to do another upgrade on lightbridge 2 and then change all allocation to LB and also upgrade firmware on Z30 thanks again
- Joined
- Aug 7, 2013
- Messages
- 1,288
- Reaction score
- 599
- Status
