- Joined
- May 24, 2022
- Messages
- 15
- Reaction score
- 7
- Age
- 62
Price is $55,000 USD Manufactured Sept, 2022. In Service May, 2023. Total use ~ 5 hours. Located in Regina, Saskatchewan Canada. We can work out shipping/delivery easily. I do not mind travelling.
I am selling our training unit Zenmuse Ailf U10 LASER METHANE LEAKAGE DETECTOR. I highly doubt this camera has more than 5 hours use. It can be used on either the M200 series or M300 drone. Our camera was used solely on an M300 RTK. We did test to confirm that the IOS base software for use with the M 200 series does work. We installed hon an Ipad Pro 11" with m1. For use with the M300 that we trained on, we used the Android version of the software installed on a DJI Smart Controller. It is great software. Very straight forward user friendly software. You can do manual inspections, waypoint or mapping missions, all of which are configured within the aps software. It is possible to use with an M350 by having the manufacturer do a modification which changes the skyport and a little bit of other hardware mods. The kit comes with a test/calibration block which has methane in it.
Methane regulations are being dynamically written and enforced. There is great opportunity with this top of the game sensor.
From documentation:
The U10 is a light-weight, high-sensitivity gas detector based on Tunable Diode Laser
Absorption Spectroscopy (TDLAS), which enables rapid identification of methane from
up to 150 m away, or at a concentration as low as 5ppm.m. Equipped with 3-axis stable
gimbal, U10 can automatically resist the interference caused by inevitable vibration.
Powered by DJI SkyPort, the U10 can be seamlessly integrated with DJI Matrice 200
Series V1 and V2 platforms, Matrice 300 RTK platforms.
Link to DJI U10 Flyer
I am selling our training unit Zenmuse Ailf U10 LASER METHANE LEAKAGE DETECTOR. I highly doubt this camera has more than 5 hours use. It can be used on either the M200 series or M300 drone. Our camera was used solely on an M300 RTK. We did test to confirm that the IOS base software for use with the M 200 series does work. We installed hon an Ipad Pro 11" with m1. For use with the M300 that we trained on, we used the Android version of the software installed on a DJI Smart Controller. It is great software. Very straight forward user friendly software. You can do manual inspections, waypoint or mapping missions, all of which are configured within the aps software. It is possible to use with an M350 by having the manufacturer do a modification which changes the skyport and a little bit of other hardware mods. The kit comes with a test/calibration block which has methane in it.
Methane regulations are being dynamically written and enforced. There is great opportunity with this top of the game sensor.
From documentation:
The U10 is a light-weight, high-sensitivity gas detector based on Tunable Diode Laser
Absorption Spectroscopy (TDLAS), which enables rapid identification of methane from
up to 150 m away, or at a concentration as low as 5ppm.m. Equipped with 3-axis stable
gimbal, U10 can automatically resist the interference caused by inevitable vibration.
Powered by DJI SkyPort, the U10 can be seamlessly integrated with DJI Matrice 200
Series V1 and V2 platforms, Matrice 300 RTK platforms.
Link to DJI U10 Flyer
