Has anyone had this issue on firmware 1.8.10

[JJB Inspections]

I am asking if anyone has run into an issue updating FW 1.8.10
I had followed the instructions on update copter first then RC
I am getting a working camera and control of Inspire pro the only thing wrong is
I am getting a faint red blinking light on gimble
And the text reports are showing an abort error multiple times after a success entry
Can any one tell me what I missed
Also this Inspire pro started life as a 3x and I upgraded to 5x
Would It be best to down grade to previous FW
Thanks for any help!

 

[Scotflieger]

I am asking if anyone has run into an issue updating FW 1.8.10
I had followed the instructions on update copter first then RC
I am getting a working camera and control of Inspire pro the only thing wrong is
I am getting a faint red blinking light on gimble
And the text reports are showing an abort error multiple times after a success entry
Can any one tell me what I missed
Also this Inspire pro started life as a 3x and I upgraded to 5x
Would It be best to down grade to previous FW
Thanks for any help!

Turn on hidden files on your computer and look at the detailed log.txt file in MISC/LOG folder. The latest update log is at the bottom starting with the line referring to 1.8.1.0. It will show which subsystem files have not been updated.

 

[JJB Inspections]

OK Thanks
So not to sound dence if I found bad files
Would reformatting SD card and reloading to previous FW on both RC and quad and reloading with newly formatted and reloaded with 1.8.10 ?

 

[Pilote35]

Hello,
I updated my inspire pro. No problem with the three first batteries, but the last battery failed. The red led blinks quickly, and the log indicates that firmware file is corrupt. Anyone has already get this problem ?
Thanks in advance