- Joined
- Mar 23, 2026
- Messages
- 2
- Reaction score
- 0
- Age
- 52
I am doing photogrammetry inspections with my M4E. I am having trouble producing clear deliverable results. Any ideas?
Clear Inspection Pictures
- Thread starter Lear JetDrone
- Start date
-
- Tags
- clear pictures inspection
What software are you using?
What is your GSD?
What are you actually inspecting?
To truly inspect small details, you need mm GSD and should be using Local 3D modeling.
I prefer to use Agisoft Cloud Inspection where you click on the model to then get the images for that point. You can see much more detail than the model.
Drone Deploy and Pix4D Cloud have similar.
If you really need to see labels and such, you are really going to need mm GSD adn for large projects this may not be feasible.
What is your GSD?
What are you actually inspecting?
To truly inspect small details, you need mm GSD and should be using Local 3D modeling.
I prefer to use Agisoft Cloud Inspection where you click on the model to then get the images for that point. You can see much more detail than the model.
Drone Deploy and Pix4D Cloud have similar.
If you really need to see labels and such, you are really going to need mm GSD adn for large projects this may not be feasible.
- Joined
- Mar 23, 2026
- Messages
- 2
- Reaction score
- 0
- Age
- 52
Hello,
I am using DJI Terra. GSD varies by project but less than 1 a majority of the time. Inspecting roads and building facade. Using 3D modeling as well. Will try the lower GSD and thank you for the reply.
I am using DJI Terra. GSD varies by project but less than 1 a majority of the time. Inspecting roads and building facade. Using 3D modeling as well. Will try the lower GSD and thank you for the reply.
Do you have the Gaussian Splatting option on Terra. Sometimes it is a much higher quality than 3D mesh.
