I am wondering if anyone knows if it is possible to change the deceleration rate when the Matrice 600pro is going to the starting waypoint in GS Pro. . It travels at 22mph and then brakes hard when it gets there. Because of the cameras and cables that are being used, this causes the gimbal to go out of whack. ( the high def camera needs a usb 3 cable which is too stiff if the gimbal has to move too far to compensate for the banking of the drone during a quick deceleration. Taking the shielding off the cable causes gps interference.) If I could make the Matrice start slowing down earlier and decelerate slowly, I would not have this issue. Or if you have any suggestions how to avoid the GPS issue if removing the shielding on the usb 3 cable. (USB 3 is needed to save the high def images to the onboard micro computer.) Thanks for any suggestions or help.