I have a matrice 200v2 and I'm trying to add a powered accessories using the drones power instead of external battery. I can get into the drone this far but don't want to open the top shell because I'm worried about the silicon bead and messing up its water resistance rating if I don't reseal it right. To me this seems to be a parallel battery system so it looks like I should be able to tap into either of the two red and back wires. The part that confuses me is why does it have 4 wires instead of two? Does that mean its not parallel? And the drone can detect each cell and battery voltage, wouldn't parallel make each battery voltage the same? And is tapping the two short red and black wires where the batteries connect to each other. Here is a photo of what I'm talking about, I would like to tap into both batteries so one doesn't drain before the other, I could also add a diodes to each battery if necessary so both could power the accessories but wouldn't connect to the batteries together if that makes since to anyone.
Thanks in advance
Thanks in advance