Welcome Matrice Pilots!
Join our free DJI Matrice community today!
Sign up

Recent content by mickydd

  1. M

    Toolkit For Service-What Is Required

    Looking to get a set of hex drivers etc for servicing, changing gimbal mounts etc. Does anyone know what sizes and types are required. If you could reply and I’ll put a list together TIA
  2. M

    TB47S Battery-Low Voltage on one cell

    I did try a manual discharge and recharge on multiple occasions but the cell imbalance remained. After only 2 cycles with the Smart Powercharge using the Deep Cycle option, the cell deviation has gone and no loss to cell capacity. Not selling or recommending these chargers, but in my opinion...
  3. M

    TB47S Battery-Low Voltage on one cell

    No loss at all, well impressed with the Smart Powercharge,
  4. M

    TB47S Battery-Low Voltage on one cell

    Apologies, forgot to update this thread that I started. I purchased a SPCM100 Smart Powercharge. After 2 full battery discharges and charge cycles the cell is now balanced. No problems since.
  5. M

    Matrice 600 Pro: What is this setup

    Hi there, Eventually I purchased an Inspire 1 Pro with X5, I now swap the X5 between the Inspire 1 and the Matrice 600. Just needed to remove the Ronin fixing and replace with X5 fixing plate on M600 and all is now good. How are you getting on, did you decide?
  6. M

    Matrice 600 Pro: What is this setup

    Chris Thanks again for your help, I am UK based, so transport costs and import duty would be substantial. Cheers
  7. M

    Matrice 600 Pro: What is this setup

    Chris Thank you so much for your detailed response. I bought this Matrice 600 Pro on a whim, had an Inspire 2 and when I saw this advertised, went for it. To be honest, I don’t use for professional purposes, didn’t come with the Ronin-MX or any camera. Was thinking of buying an X5 and the...
  8. M

    Matrice 600 Pro: What is this setup

    Thanks for that, appreciate your response
  9. M

    Matrice 600 Pro: What is this setup

    Could someone please take a look at the pictures below and advise which gimbal this is set up for? Recently purchased, not sure which setup previous owner used and unable to contact now. Thanks in advance
  10. M

    TB47S Battery-Low Voltage on one cell

    Did the cell variation correct after the charge or did it remain but the error fault went and never returned. I am in the process of recharging all batteries. I’ve also been advised to discharge the battery and then recharge Thanks for your advice, appreciated
  11. M

    TB47S Battery-Low Voltage on one cell

    I believe anything more than 0.1v variation can cause an error message.
  12. M

    TB47S Battery-Low Voltage on one cell

    If anyone could advise please. Matrice 600 Pro won’t take off, Go app states Battery Cell Error. One cell of battery No3 is 1.4v lower that other 5 cells. What do you recommend please. Thanks in advance, image below