jaja6009's latest activity
-
Jjaja6009 replied to the thread Base station - rtk/ppk.Make sure you set some of them to Check Points, and you look at the RMSE for the check points to assess your accuracy. GCP's are used...
-
Jjaja6009 replied to the thread Base station - rtk/ppk.I don't think you're doing anything wrong. Google Earth's points are accurate measured in feet in meters. Your outputs if done correctly...
-
Jjaja6009 replied to the thread RTK mapping with Matrice 4T.The Matrice 4 T does NOT produce survey grade accuracy like the Matrice 4 E. The same thing is true with the Mavic 3E and Mavic 3T...
-
JAmazon has a new battery charger for the Matrice 4 series...
-
Jjaja6009 replied to the thread First RTH Landing.Today I was testing some things. Again, it was very windy with a consistent 20 mph wind and gusts at 25. I tried out the RTH landing...
-
JI was just flying and trying different things with the controller. it took me several tries to figure out that to change setting like...
-
Jjaja6009 replied to the thread The Matrice 4 E flat out moves!.A new speed record for the Matrice. Still using the Low Noise Propellers, I broke the 70 mph mark with 71.81 mph. This was with a 20-25...
-
-
Jjaja6009 replied to the thread Base station - rtk/ppk.Are you saying that when comparing a point on your Terra created map, it disagrees with Google Earth by a meter? If so: 1. Google...
-
Jjaja6009 replied to the thread Base station - rtk/ppk.You have everything you need. You just have to put together a workflow. First. You have correctly connected the DRTK to the NTRIP...
-
Jjaja6009 replied to the thread First RTH Landing.It is quite an impressive drone, and we were lucky to grab one in the US at a good price. I see these either being impossible to get or...
-
JI finally got the time to fly my Matrice 4E for the first time. I kept trying to reset the RTH height and it would not change from 395...
-
Jjaja6009 replied to the thread Foam Behind The Gimbal.I just use the rubber guard. The rubber guard seems like it stresses the gimbal everytime I pull it off and try to put it on.
-
Jjaja6009 replied to the thread Thermal Image Samples from the new Matrice 4 Thermal.Yes, as stated above, download the Thermal SDK from the link. There are RGB and thermal images from the Matrice 4T. If needed I can...
-
Jjaja6009 replied to the thread First problem with the Matrice 4 E.When doing a video I do this: Live Mission Recording, fly how youo want the drone to proceed. When finished there is now a problem...
-
Jjaja6009 replied to the thread ND Filters for the Matrice 4E – Anyone Heard Anything?.I don't think there will be any. But I could be flat out wrong. It is not a cinematography drone. It's a public safety, mapping and...
