Welcome Matrice Pilots!
Join our free DJI Matrice community today!
Sign up

Recent content by ed.matthews4

  1. ed.matthews4

    Disassemble /Repair Manual

    Somehow, you have to determine the rating of that cap. Once you know what it is, Digikey will have it. https://www.digikey.com/en/products/filter/ceramic-capacitors/60
  2. ed.matthews4

    X7 Has Developed Severe Jello Issue

    I was thinking Props right away. Try a new set? cheap enough test.
  3. ed.matthews4

    Listening in on ATC

    There is a newer version of the Gundig available on Amazon, it has aviation frequencies also, and it's a lot less expensive. Amazon.com: Eton Executive Satellite AM / FM / Aircraft / SSB / Shortwave Radio with RDS, NGWSATEXEC: Electronics
  4. ed.matthews4

    USA Expediting approval of an FAA airspace authorization request?

    Here's someone that did it in Florida and made a vid showing how he went about it. I've had to call a tower a couple times in my previous profession, and it can take some time to get thru. At some smaller airports, you can drive up to the tower and there is an intercom phone that will put you thru.
  5. ed.matthews4

    USA Expediting approval of an FAA airspace authorization request?

    You could try calling the tower and asking the controller. I have seen where a drone operator called and was given permission for a local flight.
  6. ed.matthews4

    Generator for M600 batts

    Your lucky. I've had to take apart more carbs due to ethanol than I care to count
  7. ed.matthews4

    Search and Rescue payload release.

    A demo video,
  8. ed.matthews4

    Search and Rescue payload release.

    I have the Gannett and it works great. It uses a clip on sensor over one of the nav lights to trigger the release. You map one of the custom function buttons on the remote to turn front nav light on/off. It ways almost nothing. Inspire 2 Gannet payload release | Drone Fishing
  9. ed.matthews4

    Is the remote available?

    Is the remote available?
  10. ed.matthews4

    Generator for M600 batts

    If you pull a jet and shine light thru it, you will see some light even completely plugged because the gel is translucent. I use a 10x eye loupe to see the hole clearly.
  11. ed.matthews4

    Generator for M600 batts

    Holy Toledo! I've moved a few 8D's in my youth, that's a Heavy Beast!
  12. ed.matthews4

    Generator for M600 batts

    No, the only ethanol free gas is race gas, something like $8 a gallon and its nasty stuff. There are some states that have ehanol free gas, but I don't have any near me. I can go to my local fbo and get it at a self serve pump.
  13. ed.matthews4

    Generator for M600 batts

    A quick note, I use 3 Honda generators for various reasons, a Eu1000i, a Es5500 and an Eu6500I. All of them will suffer from ethanol gelling in the jets if they don't get used for 3 weeks or longer. To prevent this I use 100 Low Lead Avgas. It's ethanol free and can sit for over a year. If a...
  14. ed.matthews4

    DJI DL-Mount adapter?

    What lens would you like to see an adapter for? Is there a lens you have in mind that is sharp enough and light enough?